Display Settings - Fronius Primo 208-240 Serie Manual De Instrucciones

Set date
Setting the date (dd.mm.yyyy or mm/dd/yyyy, depending on the setting under
Date display format)
Time display format
For specifying the format in which the time is displayed
Setting range
Factory setting
Date display format
For specifying the format in which the date is displayed
Setting range
Factory setting
Daylight saving time
Activating/deactivating the automatic adjustment for daylight saving time
IMPORTANT! Only use the automatic daylight savings changeover function
when there are no LAN or WLAN-compatible system components in a Fronius
Solar Net ring (e.g. Fronius Datalogger Web, Fronius Datamanager or Fronius
Hybridmanager).
Setting range
Factory setting
IMPORTANT! The time and date must be set correctly for day and year values
to be displayed properly.

Display Settings

Setting range
Language
Setting the display language
Setting range
Night mode
Night mode controls the Fronius DATCOM and the inverter's display operation
at night or when insufficient DC voltage is available
Setting range
Factory setting
30
12hrs/24hrs
depends on the country setup
mm/dd/yyyy or dd.mm.yy
depends on the country setup
on/off
on
Language / Night Mode / Contrast / Illumination
English, German, French, Spanish, Italian, Dutch,
Czech, Slovakian, Hungarian, Polish, Turkish, Por-
tuguese, Romanian
AUTO / ON / OFF
OFF
AUTO: The Fronius DATCOM operation is maintained as long as a Fronius
Datamanager is connected to an active, uninterrupted Fronius Sol-
ar Net.
The inverter display is dark during the night and can be activated by
pressing any function key.