Clarity XL40D Guia Del Usuario página 17

All manuals and user guides at all-guides.com
OPERATIONS
To verify the function is active, lift the handset and check the light at the top
of the phone . If the light is , the function is active . To adjust the
ORANGE
level of amplification for your voice, use the switch on the side of the phone
labeled You can choose
"Outgoing Speech Amplification" (OSA).
between three levels: Low, Med and High .
(See Figure 13)
To return to the default setting for your voice volume level,
press and
the button again for three seconds . You will hear a
hold BOOST/OSA
beep confirming that the function is disabled . To verify, the light at the top
of the phone should not be orange when you are on a call .
NOTE: In order to experience the best audio quality for both
parties during a call, we recommend you turn on this function only
if your voice is too quiet. OSA is not active in speakerphone mode.
17