Wallmount Installation - Clarity XL40D Guia Del Usuario

The phone operates as a regular phone if there is no power or backup
batteries . In this case, the indicator lights, the loud ringer, the lighted key-
pad and the amplification will be disabled; you will still be able to make and
receive phone calls, but the extra amplification will not be engaged .
We recommend installing batteries if you live in an area with frequent
power outages .
Wall Mount Installation
Pull the handset hook out of the base and reverse its position so
Step 1:
that the hook points up and will hold the handset when you hang
up .
(See Figure 3)
Plug one end of the short flat telephone line cord into the jack
Step 2:
marked LINE located on the back of the telephone . Then run the
cord through the groove on the back of the phone . Insert the tabs
of the mounting bracket into the slots in the back of the phone .
Push the mounting bracket in and down firmly until it snaps into
place . (
See Figure 4)
Plug the flat telephone line cord into the wall plate jack, then align
Step 3:
the mounting bracket's keyhole slots with the wall plate studs and
slide the base of the phone downward to secure it on the wall .
(See Figure 5)
Figure 3
All manuals and user guides at all-guides.com
XL40D INSTALLATION
Figure 4 Figure 5
9