Memory Storage; Outgoing Speech Amplification (Osa) - Clarity XL40D Guia Del Usuario

Memory Storage

1 . Press and hold the desired memory locatio
to store the number . The phone will beep to confirm you are in
gency)
memory programming mode .
2 . Enter the telephone number you wish to store (up to 31 digits) . If no
button is pressed within 30 seconds, the phone will time out and go back
to idle or talk mode .
3 . Press the
HOLD/PROGRAM
phone will beep to confirm the number has been saved .
4 . To change a Memory location, reprogram using the same procedure
with the button to be changed .
To dial the saved numbers:
1 . In handset mode, lift the handset and press the appropriate
memory button .
2 . In speakerphone mode, press the appropriate memory button with the
handset in the cradle .

Outgoing Speech Amplification (OSA)

This function amplifies your speech so it becomes louder to the person
on the other end of the call . To enable this function,
the
BOOST/OSA
beeps; the function can be enabled/disabled while on a phone call or in
standby mode .
Figure 12
16
All manuals and user guides at all-guides.com
OPERATIONS
(See Figure 10)
button to save the desired number . The
button for three seconds .
n (M1-M10 and Emer-
press and hold
(See Figure 12)
Figure 13
(See Figure 11)
The phone