Next Level Racing Elite Serie Manual De Instrucciones página 11

support@nextlevelracing.com
( )
ESB
02
Align the holes on the External Swivel Bracket (ESB) and the Main Swivel Bracket (MSB) with the holes
of the Aluminium Extrusions.
03
Bolt through and secure with M8 Bolts, Washers and Flange Nuts.
PARTS:
( )
MSB
• • 1x External Swivel Bracket
("ESB" Sticker Label)
• • 1x Main Swivel Bracket
("MSB" Sticker Label)
NOTE:
Follow the stickers on the parts to
avoid misplacement of the brackets.
PARTS:
• • 4x M8 60mm Bolts
• • 4x M8 Washers
• • 4x M8 Flange Nuts
20
( )
MSB
04 Align the holes on the Swivel Bracket with the holes on the Main Swivel Bracket
(MSB).
05 Align a 43mm Barrel Spacer in between the two brackets from Step 04. Bolt through
using M8 Bolt, Washer and Wing Nut.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x Swivel Bracket
NOTE:
Follow the stickers on the parts to
avoid misplacement of the brackets.
PARTS:
• • 1x M8 60mm Bolt
• • 1x M8 Washer
• • 1x M8 Wings Nut
• • 1x 43mm Barrel Spacer
Note: Replace the Wing Nut with a
Flange Nut for a fixed setup.
21