Next Level Racing Elite Serie Manual De Instrucciones página 3

support@nextlevelracing.com
PRE-RACE
CHECKS
WARNING
• Please do not use power tools for assembly as over tightening can damage parts.
• If in doubt consult the installation video or contact us on support@nextlevelracing.com
• T-Nuts can not be installed mid channel. Must be installed from the ends of extrusion.
• Plan the placement of cable management clips at the start of your build.
• Please ensure T-Nuts are correctly placed within the extrusion.
• Lay out and build on a level surface.
• Beware of sharp edges on extrusion pieces.
• Do not force parts together.
• Avoid cross threading bolts.
If you require any support with your product please contact our friendly
team at: support@nextlevelracing.com
ALUMINIUM EXTRUSION TIPS
• Please do not use power tools for assembly as over tightening can damage your frame.
• Please ensure T-Nuts are correctly placed within the extrusion.
• Beware of sharp edges on the extrusion pieces.
• Do not force parts together.
• Avoid cross threading bolts.
WARNING
CHOKING HAZARD - Small parts not for children under 3 years
or any individuals who have a tendency to place inedible objects
in their mouths.
ASSEMBLY
VIDEO
bit.ly/nlrbuild
4
IN THE
BOX
*NOT TO SCALE
1 x Tablet Top Clamp
1 x Button Box Bottom Clamp 1 x Button Box Top Clamp
2 x 4040 Aluminium
1 x Tablet Mount Connector
Extrusions Bracket 1 x Swivel Bracket
1 x Internal Swivel
2 x Wide Full Width T-Nuts
Bracket (ISB) 2 x Full Width T-Nuts
2 x M8 16mm Bolts
1 x M8 70mm Bolt 11 x M8 60mm Bolts
16 x M8 Washers
2 x M6 Washers 12 x M8 Flange Nuts
2 x Cable Management Clips
Video Instruction: bit.ly/nlrbuild
1 x Wheel Deck Mounting
1 x Tablet Bottom Clamp Bracket
1 x Main Swivel
2 x External Swivel
Bracket (ESB) Bracket (MSB)
1 x M6 Allen Key
2 x 36mm Barrel Spacers
1 x M8 Allen Key
2 x 43mm Barrel Spacers
12 x M8 Wing Nuts
4 x M6 Wing Nuts
2 x M6 20mm Bolts
NOTE: Some Items Come with Rust Resistant Coating
5