Next Level Racing Elite Serie Manual De Instrucciones página 9

support@nextlevelracing.com support@nextlevelracing.com
CLAMP HEIGHT ADJUSTMENT
(TO LOCK ELECTRONICS IN PLACE)
SUITED FOR
BUTTON BOXES OR PHONES
SUITED FOR
VARIOUS TABLETS OR SMALL
DISPLAY SCREENS
20
Loosen the Wing Nuts on the back of the clamps. Place the Tablet or Button Box in place. Tighten the
clamp against the electronics and secure in place by tightening the Wing Nuts on the back.
WHEEL DECK
CONFIGURATION
PARTS:
• • NIL
16
)
NOTE: Replace the Wing Nut with a
A
Flange Nut for a fixed setup.
A) Align the holes on the Wheel Deck Mounting Bracket with the holes on the Tablet Bottom Clamp
01
B) Align a 43mm Barrel Spacer in between the two brackets. Bolt through and secure using M8 Bolt, Washer and
Wing Nut.
02a
Align the holes on the Wheel Deck Mounting Bracket with the matching holes on the Wheel Deck of
your cockpit. Secure using M6 Bolts, Washers and Wing Nuts.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1x M8 60mm Bolt
)
B
• • 1x M8 Washer
• • 1x M8 Wings Nut
• • 1x 43mm Barrel Spacer
PARTS:
• • 2x M6 16mm Head Bolts
• • 2x M6 Washers
• • 2x M6 Wing Nuts
17