Next Level Racing Elite Serie Manual De Instrucciones página 5

support@nextlevelracing.com support@nextlevelracing.com
( )
ESB
05
Bolt through using M8 Bolts, Washers and Flange Nuts.
(
ISB
( )
ESB
( )
ESB
06
Align the two extrusion assemblies lining up the holes on the Internal Swivel Bracket (ISB) with the
holes on the External Swivel Bracket (ESB).
PARTS:
• • 4x M8 60mm Bolts
( )
ESB
• • 4x M8 Washers
• • 4x M8 Flange Nuts
PARTS:
• • NIL
( )
MSB
)
8
NOTE: Replace the Wing Nut with a
Flange Nut for a fixed setup.
07
Align a 36mm Barrel Spacer in-between the two brackets from Step 06. Bolt through using an M8
Bolt, Washer and Nut.
( )
ESB
08
Align the holes on the Swivel Bracket with the holes on the Main Swivel Bracket (MSB).
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1x M8 60mm Bolts
• • 1x M8 Washer
• • 1x M8 Wing Nut
• • 1x 36mm Barrel Spacer
PARTS:
• • 1x Swivel Bracket
( )
MSB
9