Next Level Racing Elite Serie Manual De Instrucciones página 8

support@nextlevelracing.com support@nextlevelracing.com
NOTE: Install T-Nuts suited for your
cockpit extrusion profile.
16
Install 2 x T-Nuts into the outside channels of the Left or Right Vertical Upright of your Elite Series
Cockpit.
)
A
)
B
17
A) Align the holes on the Swivel Bracket with the T-Nuts previously installed in Step 16.
B) Bolt through and secure using M8 Bolts and Washers
PARTS:
• • 2 x T-Nuts
FGT ELITE COCKPIT
GTELITE COCKPIT
PARTS:
• • 2x M8 16mm Bolts
• • 2x M8 Washers
14
ARM ANGLE ADJUSTMENT
18
Loosen the Wing Nuts in the joints of the arm to adjust the angle of each section to the desired
position. Tighten the Wing Nuts after achieving the final desired configuration.
CLAMP ANGLE ADJUSTMENT
19
Loosen the Wing Nut in the Tablet Mount Connector Bracket. Adjust to the desired angle and tighten
the Wing Nut to lock in place.
15
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • NIL