EDM Koma Pro 08338 Manual De Instrucciones página 54

English
under certain conditions. Do not smoke while
preparing or refueling.
Do not approach any flame or hot element to
the fuel. Do not smoke when handling fuel, when refilling
or when working.
Do not refill fuel in areas where flames, sparks or hot
sources are. Refill only in ventilated areas with engine off.
Do not overfill the fuel to try to overfill the fuel tank. In
case of fuel leakage, eliminate these before starting the
machine, do not attempt to start the engine but move the
machine away from the area of spillage and avoid creating
any source of ignition until petrol vapours have dissipated.
Refill fuel before to start the machine. Do not unscrew
the combustible tank cap while the engine is running or
engine is hot.
Make sure the gas cap is properly closed while operating
the machine. Be sure to properly close the gas cap after
refueling.
Store fuel in a bottle or tank homologated and according
to current regulations.
2.5. USE AND CARE OF THE MACHINE
Use this brushcutter only to cut grass and small bushes.
Any other type of usage is dangerous and run at your own
risk. Do not use the machine for other jobs. For example,
do not use the machine to cut wood, plastic materials,
bricks or construction material. The use of the machine for
other uses could be dangerous.
Use this machine and its accessories according to the
instructions provided and taking into account working
conditions and work to be done. The use of this machine
for jobs different to those stipulated can cause danger.
The manufacturer will not be responsible for damages
provoked through an inadequate use of the machine.
Check that all security elements are installed and in good
working condition.
Remember that it is the end user operating the machine
who is responsible for any danger or damages caused to
other people or things. The manufacturer will not in any
case be held liable for damages caused by an incorrect
use of this machine.
The sharp cutting tool is very dangerous. If instructions are
not followed it will result in serious injury.
Keep all parts of your body away from the cutting tool
during operation.
Do not force the machine over its capacity. Use the
machine for the correct job. The use of the machine for
its proper job, will ensure that you work better and more
safely.
Keep the machine with a good maintenance. Ensure
all moving parts are aligned and that no other parts are
damaged or broken. If the machine is damaged, repair
before use. Many breakages occur because machines are
poorly maintained.
Maintain the cutting elements sharp and clean.Cutting
elements that are clean and well sharpened, are easier to
control and less likely to block.
Maintain the handles of these machines dry and clean.
Oily or greasy handles are slippery and will cause loss of
control of the machine.
Switch off the machine, unplug the spark plug and make
sure the cutting tool is stopped before carrying out
any adjustments to any part of the machine, refuelling,
cleaning , transport or storage the machine. Such security
measures reduce the risk of accidental start up.
54/100