Troubleshooting - EDM Koma Pro 08338 Manual De Instrucciones

9. TROUBLESHOOTING

Cylinder
Spark plug
compression
works
normal
Yes
Yes
Not enough
compression
Engine does not
turn
If the engine does not work correctly (lacks power, no load speed not stable etc), we attach a series of symptoms, the
probable cause and its solution:
Probable cause
No petrol in deposit
Petrol filter is dirty
There is water in the petrol mix
Yes
Petrol used is not adequate
The carburetor is dirty
Switch is in the Off position
No
Spark plug is dirty
The connecting pipe to the spark plug
is not well connected
Spark plug is loose
Piston and segments are worn out
Yes
Cylinder deteriorated
Engine burnt out
69/100
Corrective action
Put petrol in deposit
Clean the filter
Replace the petrol
Change the petrol used
Take the machine to your nearest
official service agent
Place the switch on the On or "I"
position
Limpie la bujía
Connect the pipe correctly
Tighten
Take your machine to your nearest
official service agent
Take your machine to your nearest
official service agent.
Take your machine to your nearest
service agent
English