Transport; Storing; Recycling Or Disposal Your Machine - EDM Koma Pro 08338 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. TRANSPORT

Never pick up or carry the machine while the engine is
running. It is always neccesary too to turn off the motor
before transporting the machine between work locations.
Wait 5 minutes before switching off the motor to transport
the machine.
Always carry the machine with the motor off, with the
machine hanging from the harness and use the blade
guard installed keeping the machine always high so it
does not touch the ground.
If you are going to transport the machine in a vehicle,
make sure you secure the machine safely to avoid the
machine from sliding or falling over from side to side.

11. STORING

Wait 5 minutes after the turned off for it to cool before
storing or transporting the machine. The exhaust pipe of
the machine will remain hot after the motor shutdown. Do
not ever store the machine closer to flammable material
(dry grass, wood...) gas or fuel.
Store this machine out of the reach of childrens, where
nobody is at risk, in a safe, clean, dry place where
temperature is between 0ªC and 45ºC.
Before storing the machine follow the points on storing
included in the maintenance chapter.
Always set the blade guard.
If you are going to store the machine in a closed place
drain the fuel of the deposit because the steam could
contact with a flame or a hot element and swollen. If the
fuel tank has to be drained this should be done outdoors
and following the recycling normative.
To reduce fire hazard, keep the engine, silencer and petrol
tank area free of cutted material and grease.
12. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Protect the Environment. Recycle used oil by this machine
and take it to a recycling or follow local recommendations.
Do not empty into drains, soil, rivers, lakes or seas.
Dispose of your machine in an ecological manner. We
should not get rid of the machine with our domestic
rubbish. Its plastic and metal components can be
reclassified and can be recycled.
Packing materials used for this machine are recyclable.
Please do not dispose of these with your domestic litter.
Dispose of these materials in sites officially placed for
collection of these residues.
71/100
English

Publicidad

Tabla de contenido
loading

Productos relacionados para EDM Koma Pro 08338

Tabla de contenido