Warning Symbols; Machine Symbols - EDM Koma Pro 08338 Manual De Instrucciones

English

3. WARNING SYMBOLS

Warning labels indicate required information for the use of
the machine.
Warning and care.
Do not let people enter in the work
area. This area will be of a diameter
of 15 meters from the point in which
you are working.
Wear non-slip protective boots with steel
protections.
Wear appropriate safety gloves.
Eye protection is required at all times.
Acoustic protection must be used at all
times.
It is necessary to read this user manual
carefully before using this machine.
Attention !: Do not touch the cutting blade.
Attention! Danger !: The cutting tool can
project objects with force.
Be careful not to hit anything when turning
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
Complies with EC Directives.
Guaranteed level of sound power Lwa,
Db(A).
XX
Dispose of your appliance in an
environmentally friendly way. Do not throw it
into household garbage containers.
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95 and
synthetic oil for 2 stroke engines to
2.5% (40:1).

4. MACHINE SYMBOLS

In order to ensure safe operation and maintenance of the
machine are the following symbols in the machine.
Fuel tank. Located in the combustible tank
cap. Mix 2 stroke oil and gasoline.
Air positions:
Open = Normal operating position. Located
in the top of the filter.
Open = Normal operating position. Located
in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
0
Positions start switch located on the right
STOP -
handle of the machine.
"O" = Off (The machine don´t work)
I
"I"= On (The machine is ready to work)
Sense of rotation.
56/100