Maintenance And Service - EDM Koma Pro 08338 Manual De Instrucciones

English
Remember that the end of the nylon threat is the one that
makes the cut. Get a better result if you do not introduce
the entire head in the cutting area. Enter the head slowly
and let the nylon tips cut the grass at their own pace.
WARNING DANGER: Do not operate the brush cutter
in areas with metallic materials.
Always use the proper protective equipment. Don't use this
machine in areas where you can't see properly.
7.1.2. CUT WITH THE DISC
Check the disc holder and make sure it is tight and there
are no signs of damage or abrasion.
Make sure the disc and disc holder are firmly installed in
accordance with the instructions and that the disc spins
freely without producing abnormal sounds.
CUTTING METHOD:
- Cut with the left front of the disc.
- Always cut to the left keeping the disc slightly
inclined to the left.
IMPORTANT:
- Only use this machine to cut grass. Do not let
the disc touch materials that can not cut as stones,
metals, hard wood, wire mesh, etc.
- Keep the blade sharp. A bad sharpened disc cause
a higher cutting force on the machine as well as
increased risk of rebound or projection materials.
- Keep the area to be cut clean with no traces of
chopped vegetables or other materials.

8. MAINTENANCE AND SERVICE

Make periodic inspections of the machine to ensure that
the machine is correct. For a thorough inspection take the
machine to your dealer.
It is necessary to stop the engine and to check that
the cutting tool is stopped before cleaning or transporting
the machine.
Before performing any maintenance or repair the machine
make sure the engine is off and remove the spark plug
cap. Perform all maintenance of the machine when is set
on a flat and clear surface.
Never try adjustments in the machine if it is running
and / or attache to the user by the harness. Perform all
maintenance of the machine when is set on a flat and
clear surface.
Warning! Do not modify the machine or change the
cutting elements. An inadequate use of these elements
can cause serious personal damages and can even be
fatal.
Use only suitable spares to get a proper performance
for this machine. This replacement can be found on the
official distributor of the machine. Using other sparks may
causes risks, damage to the user or people around the
machine.
Carburetor adjustment is complicated and should
be done only by the service.Carburetor regulation is
complicated and should only be carried out by a service
agent. An incorrect regulation of the carburetor can cause
damages to the engine and is sufficient motive to cancel
the warranty.
The removal of security devices, an improper
maintenance, the substitution of elements with non original
elements can cause corporal damages.
8.1. CARE AND MAINTENANCE AFTER USE
Carry out the following operations when you have finished
66/100