EDM Koma Pro 08338 Manual De Instrucciones página 60

English
The skirt of the protector must not be worn when
working with the cutting disk.
The transmission can be locked by
inserting a tool or screwdriver through
the transmission hole and the notch
on the plate (3).
6.2.3. CUTTING ACCESSORY DESCRIPTION
1. Steel disc.
2. 2 wire head.
3. Centering plate.
4. Clamping plate
5. Protective bell of the disc.
6. Protective hood of the disc.
7. Disc nut.
Protector
Protector flap
6.2.4. MOUNTING THE NYLON BUMP HEAD
6.2.4.1. CHANGE OF THE NYLON BUMP HEAD
60/100