SICK CSM Instrucciones De Uso página 35

6.2 Teach-in procedures and tolerance selection
8027352/2022-05-19 | SICK
Subject to change without notice
CSM-xxxBxxxx:
120
100
80
60
40
20
0
10 11 12
(0.39) (0.43) (0.47)
1 red light
2 green light
3 blue light
Keylock activation and deactivation: hold down teach-in button > 30 seconds.
Yellow LED indicator will blink continuously when holding down teach-in button during
the 30 seconds and off when lock is activated. When locked, the yellow indicator will
not lit even when teach-in button is pressed. To unlock, press teach in button for
30 seconds.
1-point-teach-in via teach-in-button
Default tolerance: middle tolerance
1. Position the light spot onto the target color
2. Press the teach-in button on the sensor for longer than 1 second (short press);
until the yellow LED goes out.
3. Stop pressing the teach-in button
OPERATING INSTRUCTIONS
13 14 15 16
(0.51) (0.55) (0.59) (0.63)
>1 s <2 s (short press)
O P E R A T I N G I N S T R U C T I O N S | CSM
3
2
1
17 18 19 20
(0.67) (0.71) (0.75) (0.79)
Sensing distance in mm (inch)
35
en