SICK CSM Instrucciones De Uso página 36

OPERATING INSTRUCTIONS
en
36 O P E R A T I N G I N S T R U C T I O N S | CSM
✓
Yellow LED blinks Ö
✓
The emitted light will change from white to green and back to white
✓
The teach-in is completed and tolerance is set to middle.
1-point-teach-in via teach-in-button
Default tolerance: fine tolerance
1. Position the light spot onto the target color
2. Press the teach-in button on the sensor for longer than 2 second (long press); until
the yellow LED starts to blink.
3. Keep pressing the teach-in button
Yellow LED blinks Ö
The sensor is capturing more sample points for evaluation
>2 s <20 s (short press)
8027352/2022-05-19 | SICK
Subject to change without notice