Proper Use; Product Description; Operating And Status Indicators - SICK CSM Instrucciones De Uso

OPERATING INSTRUCTIONS
2.2 Notes on UL approval
en
2.3

Proper use

3

Product description

3.1

Operating and status indicators

30 O P E R A T I N G I N S T R U C T I O N S | CSM
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
Do not install the sensor at locations that are exposed to direct UV radiation
(sunlight) or other weather influences, unless this is expressly permitted in the
operating instructions.
When commissioning, protect the device from moisture and contamination.
■
These operating instructions contain information required during the life cycle of
■
the sensor.
The device shall be supplied from an isolating transformer having a secondary overcur‐
rent protective device that complies with UL 248 to be installed in the field rated either:
a) max 5 amps for voltages 0 ~ 20 V (0 ~ 28.3 V peak), or
b) 100 / Vp for voltages of 20 ~ 30 V (28.3 ~ 42.4 V peak).
Alternatively, they can be supplied from a Class 2 power supply.
UL Environmental Rating: Enclosure type 1
The CSM color sensor is an optoelectronic sensor and is used for optical, noncontact
detection of color objects.
Table 1: Operating and status indicators
4
3
2
1
Yellow LED: digital output
1
Green LED: supply voltage active
2
Teach-in button
3
Emitted light
4
CSM
Teach-in pushbutton
8027352/2022-05-19 | SICK
Subject to change without notice