SICK CSM Instrucciones De Uso página 37

8027352/2022-05-19 | SICK
Subject to change without notice
4.
After few samples points are captured, release the teach-in button and the yellow
LED will blink once
✓
The emitted light will change from white to blue and back to white
✓
The teach-in is completed and tolerance is set to fine.
NOTE
Dynamic teach-in
By keep pressing the pushbutton (>2 s <20 s) and moving the target under the emit‐
ted light, more samples can be captured over an area. Only after capturing enough
samples, release the button. The tolerance by default is fine tolerance.
Select the tolerance to coarse
1. Within 6 seconds after the teach-in, press the teach-in button again for longer
than 1 second (short press)
OPERATING INSTRUCTIONS
>1 s <2 s (short press)
O P E R A T I N G I N S T R U C T I O N S | CSM
en
37