Publicidad
Idiomas disponibles
Idiomas disponibles
en
16
Repair and customer service.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Exchangeable parts
If required, you can change the following
parts yourself:
Application tools, coolant container, handle,
chip guard, safety strap
Dove-tail guide (figure 12).
After several hours of operation, the play in
the dove-tail guide can increase. As a conse-
quence, the drill motor can glide along the
dove-tail guide by itself. This can lead to the
motor drifting down and damaging the cut-
ting tool. In this case, retighten all fastening
screws of the dove-tail guide correspond-
ingly so that the drilling motor can easily be
moved manually, yet does not glide by itself.
Cooling-lubricant system.
Flush the cooling-lubricant system with
water, clean and drain it completely when
not using the machine for periods longer
than two weeks.
For continuous operation, the cooling-lubri-
cant system must be flushed with water and
cleaned approx. every 4 weeks.
Fig. 12
Dove-tail
guide
Mounting
screws
Publicidad
