Using The Alphanumeric Keypad; Alphanumeric Input; Entering Ids/Pin; Editing Values In A Table - Mettler Toledo SevenGo pro Instrucciones De Montaje

4.7 Using the alphanumeric keypad

4.7.1 Alphanumeric input

The meter has a screen keypad for entering IDs, SNs and PINs. Both numbers and letters are allowed for these
entries.
Note
When entering a PIN, each character entered will be displayed as ( * ).
1 Press
downwards.
2 Press READ to confirm the entry.
The line where the position of alphanumeric character is being entered blinks.
3 To end and confirm entry, use softkeys to highlight screen key OK, and press READ to save the ID.
— or —
4 To delete information, use softkeys to highlight
character.
— or —
5 Press MODE/EXIT to return to the upper level of the menu.
The entries are rejected.

4.7.2 Entering IDs/PIN

The three softkeys and READ key are used for navigating on the keypad and entering the ID/PIN.
Example: WATER
1 If A is highlighted, press
V is highlighted.
2 Press
W is highlighted.
3 Press READ to enter W.
4 Repositioning the highlighted bar to A, T, E and R, and press READ to enter each letter of sample ID in
sequence as described in steps a - c.
5 Reposition the highlighted bar to OK, and press READ to save the sample ID.

4.7.3 Editing values in a table

The meter has a feature, which allows the user to enter, edit or remove values in tables. (for example,
temperature and buffer values for a customized buffer group). This is accomplished by using the softkeys on
the display to navigate from cell to cell.
1 Press READ to start editing the cell in the table.
The softkeys on the display change.
2 Press
14 Operating the pH/ORP/Ion/DO meter SG98 and DO meter SG9​ ​
to move left to highlight number or letter, use
three times.
once.
and to enter the value and press READ to confirm.
to move right, and
and press READ to delete the previously entered
SevenGo (Duo) pro™/OptiOx™
to move