Operation; Description Of The Appliance; Before Commissioning - Kärcher VC 6300 Manual De Instrucciones

Do not pull the plug from the socket by
–
pulling on the connecting cable.
Check the power cord with mains plug
–
for damage before every use. If the
power cord is damaged, please arrange
immediately for the exchange by an au-
thorized customer service or a skilled
electrician.
Do not use the power cord to carry/
–
transport the machine.
Do not scrape the power cord across
–
sharp edges and ensure that it does not
get pressed.
First pull out the plug from the mains be-
–
fore carrying out any tasks on the ma-
chine.
Caution
 Never vacuum clean without the filter
bag.
This can cause damage to the appli-
ance.
 Avoid vacuum cleaning using nozzle or
suction tubes close to the head. There
is risk of injury!
 Always pull out the power cord fully dur-
ing operation.
 Protect the appliance against external
weather, humidity and heat sources.
 Turn off the appliance while you do not
vacuum.

Description of the Appliance

Please unfold the pages with the dia-
grams!
1 Power cord with plug
2 Push button take-up cable
3 On/Off button
4 LED performance display
5 Suction hose
Downloaded From Vacuum-Manual.com Manuals
12
All manuals and user guides at all-guides.com

Operation

6 Handle
(A) Battery compartment
7 Suction control
(A) + Key
(B) – Key
(C) Stand-by Function
8 Telescopic suction pipe
9 Adjustable telescopic suction pipe
10 Floor nozzle
11 Cover attachment housing
12 Attachment housing QuickClick:
includes upholstery nozzle, telescopic
gap nozzle and a furniture brush
13 Change filter indicator
14 Shutter lever, lid filter bag/ motor pro-
tection filter
15 Motor protection filter
16 Filter bag holder
17 Cover EPA filter
18 EPA-filter
19 Carrying handle
20 Turbo nozzle for floors
(only in the delivery scope of VC 6350;
you will find the description of the same
in "Special accessories, Pos.A")

Before Commissioning

Please find enclosed 2 batteries. Please
insert them in the battery compartment be-
low the handle before starting vacuum op-
erations.
 Slide and remove the battery compart-
ment cover.
 Insert the batteries, pay attention to the
polarity (+ and - marking at the base of
the battery compartment).
 Replace the battery compartment cover
and close it.
Illustration
 Lock the suction hose neck in the suc-
tion opening.
 To take off, push both lock devices to-
gether and pull the tube.
– 2
EN
Start up