Internal Battery Installation - Orbea BLUE PAPER URRUN 2022 Manual Tecnico

90 | ORBEA
RS INTERNAL BATTERY REMOVAL
INFORMATION FOR ORBEA DEALERS
8.
When installing back the top bushings and the motor,
the battery cable must be guided on top the left bush-
ing to allow the motor to be installed correctly.
9.
TECHNICAL MANUAL
8
9
B LUE PAP ER U RRU N · 2022
10. Carefully pull from the ziptie attached to the inter-
nal battery to pull the battery from the frame until
the battery connection cable is easily reachable.
10
12
ORBEA | 91
11. Disconnect the battery connection cable by turning
the lockring to the left and pulling from the connector.
11
12. Remove the internal battery from the downtube.

INTERNAL BATTERY INSTALLATION

To install the internal battery back into the frame, follow
the reverse method you used to remove it.
Check the cable routing and torque setting of all compo-
For the correct lockring and crank arms installation, con-
sult the manufacturer´s documentation:
Shimano FC-EM600 Cranks:
https://si.shimano.com/api/publish/storage/pdf/en/dm/
EP800/DM-EP800-03_ENG.pdf
E N