1 Rear Rack Installation; U D Gua R D S - Orbea BLUE PAPER URRUN 2022 Manual Tecnico

112 | ORBEA

2 1 REAR RACK INSTALLATION

Urrun is compatible with standard aftermarket rear racks.
of the seatstays. It may be necessary to use nylon wash-
ers between the rack rods and the seatstays to align the
components correctly. Follow the rack manufacturer´s
installation method.
of the dropouts.
FRAME
FRAME
M5
TECHNICAL MANUAL
When installing the rack with the necessary hard-
ware (follow the manufacturer´s instructions), check
that there are no interferences between the compo-
nents and the chain and/or cassette before using
the bicycle with the rack installed.
FRAME
M5
M5
B LU E PA P E R U R R U N · 2022
22 MUDGUARDS
Urrun is compatible with standard rear mudguards. The
the dropouts and the lower part of the seat tube.
use the bridge adapter (art. 33), that is installed onto the
M4 threads at the front of the seatstays.
When installing the rear mudguard with the neces-
sary hardware (follow the manufacturer´s instruc-
tions), check that there are no interferences between
the components and the chain and/or cassette before
using the bicycle with the mudguard installed.
FRAME
3 3 REAR M/GUARD BRIDGE 65mm KEMEN/URRUN
ART Nº: X223
33.1 Rear mudguard bridge. Kemen/Urrun
33.2 Bolt M4x12 DIN7991
Orbea does not offer Urrun models equipped
with mudguards from the factory and does not
sell mudguards sets compatible with Urrun.
Consult with an authorized dealer the com-
patibility of the components to be assem-
bled. Orbea is not responsible for the viability
of the assemblies. Consult with an authorized
dealer the available aftermarket suspension
fork front mudguard options.
M5
M5
M5
QTY.
1
2
ORBEA | 113
EN
33.1
33.2
2
2 N.m