Changing The Display Brightness-Dimmer; Setting The Clock - JVC UX-G45 Manual De Instrucciones

Changing the Display Brightness—DIMMER
Remote
ONLY
You can dim the display window.
DIMMER

Setting the Clock

Without setting the built-in clock, you cannot use the Daily
Timer and Recording Timer (see page 23).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL.
1
Activate the clock setting mode.
CLOCK
/TIMER
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode (see
page 23) is selected.
2
Adjust the hour.
PRESET UP
PRESET DOWN
DIM ON
DIM OFF
(Canceled)
Remote
ONLY
SET/RESUME
3
Adjust the minute.
PRESET UP
PRESET DOWN
"CLOCK OK" appears and the built-in clock starts
working.
To check the current time during play
DISPLAY
Source information
If there is a power failure
The clock loses the setting and is reset to "0:00." You need
to set the clock again.
SET/RESUME
Clock
16