Controls; Using The Controls - ROBBE POWER PEAK TRIPLE EQ-BID 8541 Manual De Uso

POWER PEAK TRIPLE EQ-BID
3. THE CONTROLS
Screen
Battery sockets
Voltage Sensor
socket
3.1

USING THE CONTROLS

The four buttons on the Power Peak Triple EQ-BID are multi-purpose controls, as indica-
ted by the printed legends. Pressing the buttons performs different actions depending on
the selected mode of operation.
'-' / MODE / AUTO BUTTON
• In Manual mode and Set-up mode this button is used to reduce the value of the
selected charge parameter by one increment; in Menu Select mode it selects the pre-
vious menu.
• By pressing the 'MODE' button you can select the desired process (CHARGE,
DISCHARGE or DISCHARGE - CHARGE) directly before the start.
• When the power supply has been connected, this button is used in the Select menu
to activate "Automatic mode" (AUTOMA.).
'+' / START / MAN BUTTON
• In Manual mode and Set-up mode this button is used to increase the value of the
selected charge parameter by one increment; in Menu Select mode it selects the
next menu.
• Pressing the 'START' button initiates the selected process, e.g. CHARGE.
• When the power supply has been connected, this button is used in the Select menu
to activate "Manual mode" (MANUAL).
• The 'INC' button is also used to select a language. Holding INC pressed in while con-
necting the charger to the power source takes you to the Language Select menu.
© robbe Modellsport
All manuals and user guides at all-guides.com
Operating instructions
6
Order No.
8541
Menu control
buttons
BID socket