Programming Procedure - ROBBE POWER PEAK TRIPLE EQ-BID 8541 Manual De Uso

POWER PEAK TRIPLE EQ-BID
'+' but-
ton
'+' but-
ton
'+' but-
ton
ENTER'
button
8.2 PROGRAMMING PROCEDURE (EXAMPLE: SETTING THE DATE)
You can now enter all the parameters using exactly the same procedure and sequence as
described for setting the parameters in manual mode (see Chapter 7.3). To help you keep
track of the data, a date can be entered instead of the audible beeper. The date is entered
in the format 'YYYY-MM-DD'.
© robbe Modellsport
All manuals and user guides at all-guides.com
Operating instructions
ENTER'
button
ENTER'
button
ENTER'
button
The programming procedure is started in this
screen display after you press the 'ENTER' button
to activate the programming loop.
Press the 'ENTER' button to start entering the date.
In addition to the '+' and '-' symbols at the right-hand
end of the top line you will see the year number
flashing; you can now update it using the '+' or '-'
button. Pressing the 'ENTER' button once more
causes the month number to flash, and this can now
be changed using the '+' / '-' buttons. The current
day's date can then be set in the same way. When
the date is correct, press the 'ENTER' button again
to store the information.
17
'+'
button
'+'
button
'+'
button
Order No.
8541
ENTER'
button
ENTER'
button
ENTER'
button