Terminating A Charge / Discharge Process; Displaying Charge / Discharge Data - ROBBE POWER PEAK TRIPLE EQ-BID 8541 Manual De Uso

POWER PEAK TRIPLE EQ-BID
is described in Chapter 7.4.
During a charge or discharge process the essential data for this process is stored on the
chip / KEY.
10.

TERMINATING A CHARGE / DISCHARGE PROCESS

The processor always employs the ideal process by taking the charge parameters into
account, with the result that the unit automatically terminates the charge or discharge
process exactly at the right moment. The charger always employs the optimum process
for each battery type.
10.1

DISPLAYING CHARGE / DISCHARGE DATA

Charged-in
Status display
or discharged
flashing 'F' (finish)
capacity
Actual battery
voltage
Battery type
© robbe Modellsport
All manuals and user guides at all-guides.com
Operating instructions
First connect the BID chip / KEY to the charger
using the adaptor lead. This automatically causes
the screen display shown here to appear.
If the charge parameters on the chip are acceptab-
le, press the 'ENTER' button to prepare the pro-
cess. From this point on, the procedure is identical
to a normal process initiated from a battery memo-
During a charge or discharge process
Elapsed char-
the values for that process are constantly
ge / discharge
time
shown in the working display (see Chapter
5.1).
If the process concludes successfully, the
charger alerts you with an audible beep.
The screen now displays the essential
Charge /
data relating to that process, as shown in
discharge
the adjacent illustration.
current
19
Order No.
8541
ry; the sequence