ROBBE POWER PEAK TRIPLE EQ-BID 8541 Manual De Uso página 26

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
All manuals and user guides at all-guides.com
Operating instructions
Order No.
POWER PEAK TRIPLE EQ-BID
8541
Dear customer,
Congratulations on your choice of the Power Peak Triple EQ-BID automatic charger from
the robbe range. You are now the owner of a compact charger with battery management
and integral equalizer, for use with 12 V DC.
The unit is simple to use, but the operation of a sophisticated automatic charger such
as the Power Peak Triple EQ-BID does require some knowledge on the part of the user.
These operating instructions are designed to ensure that you quickly become familiar with
its facilities.
It is therefore important that you read right through the Operating Instructions, and the
Safety Notes, before you attempt to use your new automatic charger for the first time.
We hope you have many years of pleasure and success with your new battery charger.
These instructions only apply to one of the three chargers, as all of them operate
according to the same principle.
Safety Notes
At the end of the operating instructions you will find comprehensive Safety Notes
dealing with the safe handling of battery chargers and the various battery types.
Please BE SURE to read these instructions and safety notes before you use the
charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is always
a risk of batteries catching fire and exploding.
Liability exclusion
This charger is designed and approved exclusively for use with the types of battery
stated in these operating instructions. robbe Modellsport accepts no liability of any
kind if the charger is used for any purpose other than that stated.
We at robbe Modellsport are unable to ensure that you follow the instructions supplied with
the charger, and we have no control over the methods you employ for using, operating
and maintaining the device.
For this reason we are obliged to deny all liability for loss, damage or costs which are
incurred due to the incompetent or incorrect use and operation of our products, or which
are connected with such operation in any way.
Unless otherwise prescribed by law, our obligation to pay compensation, regardless of the
legal argument employed, is limited to the invoice value of those robbe products which
were immediately and directly involved in the event in which the damage occurred. This
does not apply if the company is found to be subject to unlimited liability according to bin-
ding legal regulation on account of deliberate or gross negligence.
2
© robbe Modellsport

Publicidad

Tabla de contenido
loading

Tabla de contenido