Activities During Operation; Clipping; Changing The Battery - Heiniger OPAL Traducción Del Manual Original

Fig. 18
Fig. 19
NOTE!
For proper operation make sure that the clipperhead (1) is engaged correctly.
6.2

Activities during operation

6.2.1 Clipping

1. Fix and calm the animal sufficiently before clipping.
2. Switch on the clipper already in the field of vision of the animal.
3. Approach to the animal from ahead.
4. During clipping, look at the behaviour of the animal.

6.2.2 Changing the battery

When the battery is unloaded, the clipper is turned off by a protective circuit.
1
Fig. 20
1
Fig. 21
14
3. Fold the clipperhead (2) by light pressu-
1
2
4. Make sure, that the clipperhead (1) is en-
1
1. Move the switch to position "0" (fig.4).
2. Push the battery interlock (2) on both
2
3. Insert charged battery (1) into the she-
2
Translation of the original instructions / Small animal clipper
re on to the clipper (1) which is switched
on.
gaged firmly.
sides inward and pull the battery (1) out
of the clipper.
arer (2), until the battery lock is locked in
on both sides.