Spare Parts; Disposal - Heiniger OPAL Traducción Del Manual Original

8

Spare parts

See illustration spare parts at the end of this instruction manual.
WARNING!
Faulty spare parts may cause damages, malfunctions or total loss and may
reduce security. Therefore:
Only use original spare parts from the manufacturer. Purchase the spare
X
parts at the official distributor or directly at the manufacturer.
If using no original spare parts all warranty and service claims are expiring.
X
Pos. Description
No.
1 Top housing shell, complete
2 Bottom housing shell, com-
plete
3 Battery
4 Motor complete
5 Front motor holder
6 Rear motor holder
7 PCB clipper
8 Turning lever
9 Rubber tap
10 Seal
11 Kombitorx KA30x16 PT screw
12 Kombitorx KA30x8 PT-screw
22 Blade support
23 Blade interlock
24 Clipping pressure spring
25 Blade guide
26 Clamp holder
9

Disposal

CAUTION!
Environmental damages when disposing incorrectly!
Electronic scrap, batteries, lubricants and other indirect materials are subject
to hazardous waste treatment and may only be disposed of by approved spe-
cialist companies!
NOTE!
For disposal hand the clipper and charging station over to a nearby service
centre or specialist shop for electronics.
Translation of the original instructions / Small animal clipper
Quan- Pos. Description
tity No.
1x 27 Top blade
1x 28 Bottom blade
1x 29 Screw M3,5x4
1x 30 Complete charger
1x 31 Charging station housing
1x 32 Charging station battery clip
1x 33 Fibre optic conductor
1x 34 PCB charging station
1x 35 Base plate
1x 36 Foam disc Ø25x8
12x 37 Rubber foot
1x 50 Power supply with plug
1x 51 Plug EU
1x 52 Plug AU/ARG
1x 53 Plug GB
1x 54 Plug US
1x
Quan-
tity
1x
1x
2x
1x
1x
1x
1x
1x
1x
1x
3x
1x
1x
1x
1x
1x
19