Gastrodomus SLA350 Manual Del Usuario página 30

Cleaning the basement
After removing the components as described in the previous pages:
- Clean all disassembled parts and the machine body using only hot water (at a temperature no lower than
30°C) and biodegradable foaming detergent of the dishware type (with pH 7-8).
- Use a soft, spongy cloth and, if necessary, a nylon brush for the sharp areas of the plate and the presser.
- Rinse with warm water only and dry with soft, spongy cloths.
Cleaning the blade
- Use a damp cloth to wipe the blade, rubbing it slowly with movements from the inside to the outside.
Cleaning the circlip
- Dampen a cloth with a solution of water and alcohol.
- Insert the damp cloth between the circlip and the blade.
- Hold the two ends of the cloth with your hands and slide it along the safety ring.
To clean the machine body and blade, use only a cloth dampened in water
and biodegradable foaming dishwashing detergent with a pH of 7-8, at a
temperature no lower than + 30 °C.
Do not clean the machine ...
... with water or steam jets or similar methods.
... with corrosive detergents.
... in the dishwasher.
ALWAYS perform blade cleaning (11) with the safety ring (S) mounted and
the feeler plate close to the blade in the safety position.
Do not use detergents to clean the blade
30