System Menu - GYS STARTFLASH 120.24 CNT Manual De Uso

User manual
Alternator TESTING
This mode is used to determine the condition of the vehicle's alternator. This test is performed on a vehicle with the engine running.
1 Use the turn dial to select the vehicle's battery voltage rating.
2 Press the turn dial to confirm.
Test result: The charger displays the voltage value supplied by the alternator.
SAFEGUARDS
This device is protected against short circuiting and polarity reversals. It comes with an anti-spark system that prevents sparks
when the charger is connected to the battery. For safety reasons, the device will not deliver a current if there is no voltage to the
clamps. This charger is protected against misuse by means of an internal fuse.

SYSTEM MENU

• General browsing:
1 Scroll through the menu using the turn dial.
2 Press the turn dial to enter a menu and then, a parameter setting.
3 Use the turn dial to change the setting's value.
4 Press the turn dial to confirm the new parameter setting.
System
Languages:
Select a display language from 22 available options (FR, EN, DE, ES, RU, NL, IT, PT, PL, CZ, HU, SE, DA, FI, TR, HR, UA, SK, GR,
CN and JP).
[simplified and traditional]
Dates:
Setting the date.
Time:
Setting the time.
Options
S ilent mode:
Activates (ON) or deactivates (OFF) the device's silent mode.
A uto-Restart:
Activates (ON) or deactivates (OFF) the device's auto-restart feature. This feature automatically restarts the charger in the event of
a power failure.
A uto-Detect:
Activates (ON) or deactivates (OFF) the device's auto-detect feature. This feature allows the charging process to start automatically
when the charger is connected to a battery.
Translation of the original user manual
STARTFLASH CNT
27