STAMOS S-LS-88 Manual De Instrucciones página 38

I
J
K
L
M
N
O
P
R
S
6 – Numeric keypad
MARKING
T
U
3.3.5. SETTING VOLTAGE/CURRENT AND CONSTANT OUTPUT POWER
PARAMETERS
To define static operation (fixed output power) of the device, select
an appropriate CH1–CH4 operating channel to be modified. Select a
proper switch (I) on the control panel. The switch will light up.
VIEW
Select an appropriate operating
channel:
CH1 – channel 1; CH2 – channel 2;
CH3 – channel 3; CH4 – channel 4
Save data
Select settings for voltage (V SET)
or current (I SET)
Lock/unlock the control panel (see
3.3.13)
Stop oscilloscope function and
other operations
Oscilloscope function
Overvoltage
3.3.7.)
Overload protection (see 3.3.8.)
Confirm values
Output current
voltage stabilisation settings. If
they are active, the message "ON"
will be displayed. If they are
inactive, the message "OFF" will
be displayed.
FUNCTION
Numeric setting keypad
Return or cancel operation
protection (see
and output