STAMOS S-LS-88 Manual De Instrucciones página 42

Using the control knob or the up/down direction keys ▲ / ▼, it is possible
to control the component ("Group").
To return to the main display, press the selection key again.
3.3.10. SETTINGS AND MODIFICATIONS OF LIST MODE VALUES
A. MANUAL MODIFICATION OF THE EXISTING VALUES
Go to test data reading. To do this, select the channel whose
parameters are to be modified CH1/LIST – CH4/LIST (17–20).
Press the "TAB" key to switch the cursor from the "Group" component
to the spreadsheet.
Select the line to be changed. Use the adjustment knob or the
up/down direction keys ▲ / ▼. To move to the next line, also use the
"TAB" key.
Confirm with "ENTER". The sheet cell will light up in red.
Using left/right direction keys ◄ / ►, go to the parameter (voltage,
current or time) to be changed.
Enter the desired values using the numeric keypad.
Confirm with "ENTER".
To save data, select the "SAVE" key. Parameters will be transferred to
the device memory.