Software Operation - STAMOS S-LS-88 Manual De Instrucciones

The appropriate parameter to be configured is selected using the
"TAB" key.
To select the setting change field, use the up/down directional keys
or the control knob.
To make changes in the setting fields, use the numeric keypad,
direction keys or the control knob.
After re-selecting the "Configure" function key (21) the changes made
will be saved and the main interface will be accessed.
3.3.15. COMPUTER SOFTWARE
The device can be controlled from the computer. The available models
have 4 built-in communication interfaces and a USB/RS-232/LAN/GPIB
connector. The necessary software is supplied on a CD together with the
product.
If the device is managed using computer software, the device control
panel is automatically locked.
A. SOFTWARE INSTALLATION
Start the CD. A dialog box containing a system file will pop up. To start,
press the installation icon twice. Then follow the instructions on the
screen.
B. SOFTWARE OPERATION
Switch on a dedicated program to operate the device.
Use the interface to set the desired parameters (voltage, current) for
the channel data. Use the control knobs.