STAMOS S-LS-88 Manual De Instrucciones página 46

To finish working with an external memory drive, select the USB memory
switch (X) again. The device display will return to the main interface. Remove
the USB drive from the connection socket.
B. DATA IMPORT
To import technical data from an external USB drive, set the cursor in the
left part of the interface (dialog box).
Use the up/down direction keys to define the file. The directory name
will appear in the import section.
Use the right/left direction key to access the data import/export
section. Select the channel to which the parameters are to be imported
with the control knob.
Use the right/left direction key to select the group to which the
parameters should be imported.
Confirm the settings with "OK". The file will be implemented.
C. DATA EXPORT
Use the direction keys to go to the data export section.
The exported file name is edited using the numeric keypad. If an incorrect
number string is entered, reset the record using the "ESC" key.
Use the up/down direction key to select the channel from which the
parameters should be exported. Adjust with the control knob.
Use the right/left direction key to select the group from which the
parameters should be exported.
Confirm the settings with "OK". The file will be exported to an external
USB drive.