essentiel b ELF914-1b Instrucciones De Uso página 81

tracking indicator. At the beginning of each programme step, the corresponding LED
lights up.
INFORMATION
• If the auxiliary "Anti-crease+" function has been selected, the
and LEDs light up simultaneously while the step continues.
• To end the programme while the "Anti-crease+" step is in progress,
simply press a button or turn the programme selector.
You can change the auxiliary functions, speed and temperature settings without
interrupting the programme flow while the programme is running. To do this, the
change you are about to make must be something that will be done after the current
programme step. If the change is not appropriate, the corresponding lights will flash 3
times.
INFORMATION
• If the machine does not switch to the spin cycle, it is possible that the
"Pause drum full" function is activated or that the automatic unbalanced
load detection system is activated due to an uneven distribution of
laundry in the machine.
Loading door lock
There is a locking system on the machine's loading door to prevent the loading door
from opening when the water level is incompatible.
The door opening light
machine checks the internal water level. If the water level is compatible, the light will
go out and you will be able to open the door after 1 to 2 minutes.
If the water level is incompatible, the door open light
that the loading door cannot be opened. If you are forced to open the loading door
when its light is on, you must cancel the current programme. See "Cancelling the
programme".
starts flashing when the machine is in Pause mode. The
will remain on to indicate
81