essentiel b ELF914-1b Instrucciones De Uso página 83

Changing programme selection after starting a programme
Switch the machine to pause mode
Press to switch the machine to pause mode while a programme is running. The
current programme light flashes on the programme progress indicator, indicating that
the machine has been put on pause mode. In addition, when the loading door is ready
to be opened, the loading door light will go out in along with the programme step light.
Changing the auxiliary function, speed and temperature
Auxiliary functions can be cancelled or selected, depending on the programme step
reached. See "Selecting Auxiliary Functions". You can also change the speed and
temperature settings. See the "Spin speed selection" and "Temperature selection"
sections.
INFORMATION
• If changes cannot be made, the relevant LED flashes 3 times.
Loading and removing laundry
1. Press the button to pause the machine. The programme tracking light for the
appropriate phase, during which the machine has been set in "Pause" mode, will
flash.
2. Wait until the loading door can be opened.
3. Open the loading door and add or remove the laundry.
4. Close the loading door.
5. Make changes to the auxiliary functions, and temperature and speed settings, if
necessary.
6. Press the button to start the machine.
Programme cancellation
To cancel the programme, use the programme selector to choose another programme.
The previous programme will be cancelled. The
indicate that the programme is cancelled.
When you turn the programme selector, the machine ends the programme but the
water in the machine will not be drained. When you select and start a new programme,
it starts according to the cancellation step of the previous programme. For example,
the machine may require additional water or continue washing with the water level
present in the machine.
light flashes continuously to
83