litre of water and pour this mixture into the main wash compartment of the dispenser
drawer. >>> Pour the washing product into the machine suitable for the programmes
and observe the maximum loads indicated in the 'Programme and consumption table
». If you use additional chemicals (stain removers, bleach, etc.), reduce the amount
of washing product.
The laundry remains wet at the end of the programme. (*)
•
Excessive foam may have formed and the automatic foam absorption system may
have been activated due to excessive washing product. >>> Use the recommended
amount of washing product.
(*) The machine does not switch to the spin-drying phase when the laundry is not evenly
distributed in the drum in order to prevent damage to the machine and its environment.
The laundry must be washed and spun again.
(**) The drum is not cleaned regularly. Clean the drum regularly. See the corresponding
chapter.
WARNING!
•
If you are unable to solve the problem despite following the instructions
in this section, contact your dealer or authorised service agent. Never
attempt to repair a damaged appliance yourself.
94