essentiel b ELF914-1b Instrucciones De Uso página 91

counting until the machine takes out enough water. The machine will wait until there is
enough water to avoid poor washing results due to lack of water. The timer indicator
will resume the countdown after this.
• The timer could stop during the heating phase. >>> The timer light will not count until
the machine reaches the selected temperature.
• The timer could stop during the spin cycle. >>> An automatic unbalanced load
detection system could be activated due to uneven distribution of laundry in the drum.
The timer stopped. (*)
• The machine may contain an unbalanced load. >>> An automatic unbalanced load
detection system could be activated due to uneven distribution of laundry in the drum.
The machine does not switch to the spin cycle. (*)
• The machine may contain an unbalanced load. >>> An automatic unbalanced load
detection system could be activated due to uneven distribution of laundry in the drum.
• The machine does not spin if the water has not been completely drained off. >>>
Check the filter and the drain hose.
• Excessive foam may have formed and the automatic foam absorption system may
have been activated due to excessive washing product. >>> Use the recommended
amount of washing product.
The washing results are bad : The laundry turns grey. (**)
• An insufficient amount of washing product was used for a long period of time. >>>
Use the recommended amount of washing product for the level of water hardness
and the laundry type.
• The washing was carried out at low temperatures for a long period of time. >>> Select
the appropriate temperature for the laundry to be washed.
• Insufficient washing product was used with hard water. >>> If the water hardness
is high, using insufficient washing product may cause the laundry to turn grey over
time. It is difficult to eliminate such a grey colour once it has occurred. Use the
recommended amount of washing product for the level of water hardness and the
laundry type.
• A large amount of washing product was used. >>> Use the recommended amount of
washing product for the level of water hardness and the laundry type.
Washing results will be inferior : Stains persist or the laundry cannot be
bleached. (**)
• The amount of washing product used is insufficient. >>> Use the recommended
amount of washing product for the level of water hardness and the laundry type.
• Excessive amounts of laundry have been added. >>> Avoid overloading the machine.
Load the laundry according to the recommended quantities in the 'programme and
consumption table ».
• An unsuitable programme and temperature have been selected. >>> Select the
appropriate temperature for the laundry to be washed.
91