essentiel b ELF914-1b Instrucciones De Uso página 89

Troubleshooting
The programme does not start after the door is closed.
• You did not press press the
• Overloading will make it difficult for you to close the loading door. >>> Reduce the
amount of laundry and make sure the loading door is properly closed.
Cannot start or select a programme.
• The machine has gone into safety mode due to problems with the power supply (circuit
voltage, water pressure, etc.) >>> To cancel the programme, use the programme
selector to choose another programme. The previous programme will be cancelled.
(See the section "Programme Cancellation").
Water in the machine.
• There may be water left in the washing machine as a result of quality assurance
processes during production. >>> This is normal and does not affect the machine in
any way.
The machine goes into standby mode after the programme starts or does not
draw water.
• The tap is closed. >>> Open the taps.
• The water inlet pipe is bent. >>> Straighten the hose.
• The water inlet filter is clogged. >>> Clean the filters.
• The door can be opened. >>> Close the door.
• The water connection may have been incorrectly made or the water supply may be
cut off (when the water supply is cut off, the cleaning or rinsing LEDs flash). >>>
Check the water connection. If the water supply is turned off, press
supply has been restored to resume operation from standby mode.
The machine does not drain the water.
• The drain hose may be clogged or bent. >>> Clean or straighten the hose.
• The pump filter is blocked. Turn and remove the filter from the pump.
The machine vibrates or makes a noise.
• The machine might not be level. >>> Adjust the front feet to level the washing machine.
• A rigid substance may have entered the pump filter. Turn and remove the filter from
the pump.
• The transport safety screws have not been removed. >>> Remove the transport
safety screws.
• The amount of laundry in the machine may be too small. Put the laundry in the
machine.
• The machine may be overloaded with laundry. >>> Remove a quantity of laundry from
the machine or distribute it manually so that it is spread evenly in the machine.
• Check that the machine is not resting on a rigid object. >>> Make sure that the
machine is not placed on any object.
button. >>> *Press the button.
after the water
89