Maintenance And Cleaning - essentiel b ELF914-1b Instrucciones De Uso

INFORMATION
• Depending on the phase in which the programme was cancelled, you
may need to add washing product and fabric softener for the programme
you selected again.
End of programme
At the end of the programme, "End" is displayed.
1. Wait until the door light
2. Set the programme selector switch to "STOP" to turn the machine off.
3. Remove your laundry and close the loading door. Your machine is now ready for
the next wash cycle.
Your washing machine has a standby mode.
After turning the programme selection knob to switch on the machine, if you do
not start a programme in the selection step or if you do not perform any other
action within 10 minutes after the selected programme is completed, the machine
automatically switches to "sleep" mode. If your appliance is equipped with a display
indicating the duration of the programme, the display will go off. If you turn the
programme selector or any other knob, the indicators and display will return to their
previous positions. The selections you make when you exit standby mode can be
changed. Check that your selections are as required before starting the programme. If
necessary, change the settings. This is not a mistake.

Maintenance and cleaning

The lifetime of the appliance increases and frequently encountered problems will be
reduced if it is cleaned at regular intervals.
Cleaning the dispenser drawer
Clean the dispenser drawer at regular intervals (every 4 to 5 wash cycles) as shown
below, to avoid washing powder building up over time.
84
goes out completely.