Mafell PSS 3100 SE Instrucciones De Funcionamiento Y Seguridad página 12

Operation information:
- Make sure that no other people are in the saw's working area while the machine is in operation.
- Using the diagram on the control panel, select the correct saw blade and feed speed based on the material
to be machined.
- Prop the far end of the guide rail if it extends beyond the workpiece to be cut. This will prevent the machine
from tipping over.
- Correctly set the stop slide (which stops the feed movement and automatically returns the saw unit to its
home position) for the workpiece to be processed (workpiece length + 120 mm | 4.72 in).
- Do not remove the machine from the workpiece until the saw blade has come to a standstill and the saw unit
has moved back to its starting position.
- Only use a diamond saw blade when cutting fiber-cement panels.
12
RETAIN THESE INSTRUCTIONS!
PSS 3100 SE
01/2022