Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PSS 3100 SE
Use the following procedure to change the saw
blade:
1.
Pull out the power plug of the machine.
2.
Put down the cable where you can see it.
3.
Press and hold the locking pin (2).
4.
Loosen the flange screw 11 by turning it
counterclockwise with the Allen key (B).
You can now release the locking pin.
➢
5.
Remove the flange screw (11) and the front
clamping flange (12).
6.
Use the plunge bar 4 to press down the saw
blade. Tilting the saw blade makes removing it
easier.
7.
Remove the old saw blade.
➢
Clamping flanges must be free of adhering
parts!
The new saw blade can now be installed.
➢
01/2022
Fig. 4: Locking the saw shaft
Fig. 5: Removing the old saw blade
17
Publicidad
Tabla de contenido
