Rotational Speed Setting; Switching Off - Mafell K85Ec Instrucciones De Funcionamiento Y Seguridad

K85Ec / KSS80Ec 370

5.3 Rotational speed setting

Use the following procedure to select the
rotational speed:
1. Select the desired level at the setting wheel
(7).
At the setting wheel (7), you can adjust
➢
the saw blade speed continuously
between 2250 and 4400 rpm.
The rotational speed is set.
✓
The table below shows the saw blade speed settings that are suitable for your application:
Material
Plastic material (styrofoam)
Plastic material (styrofoam)
Wood fiber insulation material
Hardwood, softwood, laminated wood, coated panel material
Hardwood, softwood, laminated wood, coated panel material
Hardwood, softwood, laminated wood, coated panel material, soft fiber

5.4 Switching off

Use the following procedure to switch off the
machine:
1. Release the operating lever (6).
The integrated automatic brake limits the
➢
coasting time of the saw blade to approx.
5 seconds.
The switch-on lock is activated
➢
automatically and secures the hand-held
circular saw against being switched on
inadvertently.
The machine is switched off.
✓
01/2022
Fig. 14: Selecting the rotational speed at the setting wheel
Level
1
2
3
4
5
6
Fig. 15: Switching the machine off
Speed rpm
2250
2680
3110
3540
3970
4400
19