Skirt Height And Operation Check - Nilfisk Advance Terra 4300B Instrucciones De Uso

SKIRT HEIGHT AND OPERATION CHECK

ENGLISH
Side skirt check
Front and rear skirt check
22
1.
checking the skirt height.
2. Engage the parking brake.
3. Turn the ignition key (72) to "0".
1. Unscrew the knobs (23 and 21) and remove both left (20)
and right doors (22).
2. Check the side skirts (13 and 14) for integrity. Replace the
skirts when they have cuts (A, Fig. 13) larger than 0.8 in
(20 mm) or cracks (B) larger than 0.4 in (10 mm) (for skirt
replacement, refer to the Service Manual).
3. Check that distance from the ground of the side skirts
(13 and 14) is within 0 - 0.1 in (0 – 3 mm) (A, Fig. 14). If
necessary, adjust the skirt height by using the slots on the
screws (A, Fig. 17).
4. Assemble the components in the reverse order of
disassembly.
1. Remove the main broom as shown in the relevant
paragraph.
2. Check the front (15) and rear skirts (16) for integrity.
Replace the skirts when they have cuts (A, Fig. 13) larger
than 0.8 in (20 mm) or cracks (B) larger than 0.4 in (10
mm) (for skirt replacement, refer to the Service Manual).
3. Check that:
•
Fig. 15).
• The distance from the ground of the rear skirt (B, Fig.
18) is within 0 - 0.1 in (0 – 3 mm) (A, Fig. 14).
4. If necessary, adjust the skirt height by using the slots on
the screws (C and D, Fig. 18).
5. Press the front skirt lifting pedal (5) and check that the front
skirt (A, Fig. 16) turns upward for about 90° (as shown in
does not remain in an intermediate position but returns to
its initial position. If necessary, for the front skirt control
cable adjustment or replacement, refer to the Service
Manual.
6. Assemble the components in the reverse order of
disassembly.
Drive the machine on a level floor that is suitable for
The front skirt (A, Fig. 18) slightly touches the floor (A,
the figure); then release the pedal and check that the skirt
INSTRUCTIONS FOR USE
Terra™ 4300B - 1464035000
A
Figure 13
Figure 15
Figure 17
Figure 18
S311400
S311402
A
06/2009
Figure 14
Figure 16
S311401
S311403
S311404
S311405