Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
E N G L I S H
•
Operate and maintain the assembly power tool for blind rivets as recommended in the instruction handbook, to
prevent an unnecessary increase in vibration levels.
•
Select, maintain and replace the consumable/inserted tool as recommended in the instruction handbook, to prevent
any unnecessary increase in vibration levels.
•
Hold the tool with a light but safe grip, taking account of the required hand reaction forces, because the risk from
vibration is generally greater when the grip force is higher.
1.9 ADDITIONAL SAFETY INSTRUCTIONS FOR PNEUMATIC POWER TOOLS
•
The operating supply air must not exceed 7 bar (102 PSI).
•
Air under pressure can cause severe injury.
•
Never leave operating tool unattended. Disconnect air hose when tool is not in use, before changing accessories or
when making repairs.
•
Never direct air at yourself or anyone else.
•
Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings.
•
Prior to use, inspect airlines for damage, all connections must be secure. Do not drop heavy objects on hoses. A sharp
impact may cause internal damage and lead to premature hose failure.
•
Cold air shall be directed away from hands.
•
Whenever universal twist couplings (claw couplings) are used, lock pins shall be installed and whip check safety cables
shall be used to safeguard against possible hose-to-tool or hose-to-hose connection failure.
•
DO NOT lift the placing tool by the hose. Always use the placing tool handle.
•
Vent holes must not become blocked or covered.
•
Keep dirt and foreign matter out of the hydraulic system of the tool as this will cause the tool to malfunction.
6
O R I G I N A L I N S T R U C T I O N
Publicidad
Tabla de contenido
