Priming; Oil Details; Hyspin® Vg 32 Oil Safety Data; Waste Disposal - Stanley 73200 Manual De Instrucciones Y Servicio

O R I G I N A L I N S T R U C T I O N

8. PRIMING

Priming is ALWAYS necessary after the tool has been dismantled and prior to operating. It may also be necessary to restore
the full stroke after considerable use, when the stroke may have been reduced and fasteners are not now being fully placed
by one operation of the trigger.

8.1 OIL DETAILS

The recommended oil for priming is Hyspin® VG32 available in 0.5 litre (part number 07992-00002) or one gallon containers
(part number 07992-00006). Please see safety data below.
8.2 HYSPIN® VG 32 OIL SAFETY DATA
First Aid
SKIN:
Wash thoroughly with soap and water as soon as possible. Casual contact requires no immediate attention. Short term
contact requires no immediate attention.
INGESTION:
Seek medical attention immediately. DO NOT induce vomiting.
EYES:
Irrigate immediately with water for several minutes. Although NOT a primary irritant, minor irritation may occur following
contact.
Fire
Flash point 232°C. Not classified as flammable.
Suitable extinguishing media: CO2, dry powder, foam or water fog. DO NOT use water jets.
Environment
WASTE DISPOSAL: Through authorised contractor to a licensed site. May be incinerated. Used product may be sent for
reclamation.
SPILLAGE: Prevent entry into drains, sewers and water courses. Soak up with absorbent material.
Handling
Wear eye protection, impervious gloves (e.g. of PVC) and a plastic apron. Use in well ventilated area.
Storage
No special precautions.

8.3 PRIMING KIT

The 73200 Service Kit includes all of the parts needed to prime the tool. However, if required, a Priming Kit can be supplied
separately.
PART NO.
07900-01060
07900-01061
07900-01062
07900-01063
07900-01066
To fit the Pull Stroke Setter and Return Stroke Setter, the following standard tools are needed (not supplied with Priming Kit).
• 27mm Spanner
• 10mm Allen key
Spanners and Allen keys are specified across flats unless otherwise stated.
PRIMING KIT : 73200-99991
DESCRIPTION
PRIMING SYRINGE
PULL STROKE SETTER
RETURN STROKE SETTER
PRIMING SYRINGE EXTENSION
STARTER NUT
E N G L I S H
QTY.
2
1
1
1
1
23