Advice On Disposal - UFESA CE7151 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
POSSIBLE CAUSE
Coffee is ground very finely or tamped too firmly.
Coffee filters out in
drops
The appliance is blocked with scale build-up.
Coffee is stale or dry.
Espresso does not have
Coffee is not tamped firmly enough.
characteristic foam
Coffee is ground too coarsely.
Not enough coffee in the filter (H).
Coffee is tamped too firmly.
Coffee is ground too finely.
Filter holder (E) does not sit firmly as it has not been tightened firm
enough.
Holder loosens during
brewing
There are coffee particles around the filter rim (H).
Brew head is dirty.
Brew head is damaged.
Rubber seal of the brew head is damaged or worn out.
Cups, filters (H) or filter head are cold.
Coffee is too cold
When making cappuccino or latte, milk is not heated enough.
No steam from steam
Steam wand (C) is blocked.
wand
Milk is not fresh.
Temperature of milk is too high.
Not enough frothed milk
Jug.
Steam wand is blocked.
Milk has been boiled.
Uneven distribution or interrupted outflow of coffee.
Uneven distribution of
coffee into cups
Damaged partition in filter holder (E).
Coffee used is unsuitable.
Espresso has burnt
taste
Appliance was not rinsed after descaling.
No water in water tank.
Pump makes too much
noise
Water tank is not properly inserted.
Filter (H) in brew head may be blocked.
Appliance does not
work
Appliance is blocked with scale build-up.

Advice on disposal

Our goods come in optimised packaging. This basically consists in using
non-contaminating materials which should be handed over to the local waste
disposal service as secondary raw materials.
This product complies with EU Directive 2002/96/EC. The crossed
wheelie bin symbol shown on the appliance indicates that when it comes
to dispose of the product it must not be included in with household refuse.
It must be taken to a special refuse collection point for electric and
electronic appliances or returned to the distributor when purchasing a similar
appliance. Under current refuse disposal regulations, users who fail to take
discarded appliances to special refuse collection points may be penalised. Correct
disposal of discarded appliances means that they can be recycled and processed
ecologically, helping the environment and allowing materials used in the product to
be reused. For more information on available waste disposal schemes contact your
HOW TO FIX, WHAT TO DO
If you use very finely ground coffee, do not tamp it too firmly.
See Descaling.
Use fresh coffee. After opening the coffee, ensure it is stored in
a tight container.
Tamp coffee more firmly.
Use properly ground coffee or change coffee brand.
See Brewing espresso.
Tamp ground coffee less firmly.
Change to coarser coffee.
Ensure coffee holder (E) is placed correctly and tightened home in
the brew head. See Brewing espresso.
Clean the rim of the filter (H) and wipe all coffee from the brew head.
Wipe the brew head with a damp cloth.
Contact an authorised service center.
Contact an authorised service center.
Before brewing, pre-heat cups, filters and holder. See Brewing espresso.
Check if milk is properly heated during frothing. Ensure that milk
does not boil. See Frothing milk.
See Maintenance and cleaning.
Check if milk is fresh.
Check that milk is properly cooled before use.
To obtain best results when frothing, use the stainless steel jug
provided and cool it down or rinse with cold water if possible.
See Maintenance and cleaning.
Try to use fresh, cooled milk.
Check if coffee is evenly tamped and check if anything obstructs the
outlets in the head for fixing the filter.
Contact an authorised service center.
Try other coffee brands.
Before brewing next coffee, rinse the appliance with a tankfull of
water, allow tank to empty completely.
Fill up water tank with water (1).
Check if water tank is properly inserted.
Take out filter holder (E) and clean brew head unit. See Maintenance
and cleaning.
See Descaling.
local refuse service or the shop where the product was purchased. Manufacturers
and importers are responsible for ecological recycling, processing and disposal of
products, whether directly or via a public system.
Your local town council can provide you with information about how to dispose of
obsolete appliances.
The manufacturer does not accept any liability for any damages resulting from unintended use
or inappropriate handling.
The manufacturer reserves his right to modify the product any time in order to adjust it to the
law, standards, directives, or due to construction, trade, aesthetic or other reasons, without prior
notice.

Publicidad

Tabla de contenido
loading

Tabla de contenido